Proface CA3-DFS15-01 Manual CA3-DFS15-01 User's Manual

Adapter for EX module (5 / set)Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master station15 inches, replaced by a host of backlight (1).Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C CA3-DFS15-01 User's Manual. Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2For 5 CA3-DFS15-017 inch models, prevent cable loose from the USB cable fastening clip (5 / set).For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).10.4 inches (TFT), the replacement of the host backlight (1).Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interfaceFor 5 CA3-DFS15-01 User's Manual. 7 inch models, for fixing the hooks of the three EX modules.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceCOM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionEngineering documents created by the LT interface to download images and logic programming software through the USB interface CA3-DFS15-01 User's Manual. COM2 terminal adapter for communication through the RS-422/485 connection13 pin input connectors for HTB and 16 pin output connectors. (1 / set)7.5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets).Suitable for A/B+ Type modelsExpansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface.COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)10.4 inches (TFT), for the prottection of the man-machine interface from oil and chemical pollution (5 / set) CA3-DFS15-01 Manual. 10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the requirred accessories CA3-DFS15-01 Manual. The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.