Proface CA3-DFS6-01 Screen protection film Proface CA3-DFS6-01

Used to prevent disconnection. (1 interface, 5 / set)7.5 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).For the operation screen (5 pieces) (GP3000H standard).7 inch widescreen display module installed on the senior panel adapter GP-2400, GP-3400 and GP-4400 series of holes Proface CA3-DFS6-01. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port CA3-DFS6-0110.4 inches (STN), the replacement of the host backlight (2 / set).Portable GP2000H series models accessories, RS-232 single head cable (10 m).When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function Proface CA3-DFS6-01. (1)Durable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter.COM2 adapter for converting the COM2 interface to the RS-422 terminal blockSome types of PLC are not connected. Length: 5 meters.Connector for connecting DC power cord. (linear, 5 / set)Standard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface CA3-DFS6-01.
Length of 5 meters. LT seal on the control panel.Cable for transmitting an image signal from an Pro-face host to a Pro-face industrial display or other commercial display device (24- DVI-D pin convex) Proface Screen protection film. Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).1-0 DVI standard (DVI-D 24 pin convex connector)For 5 Proface Screen protection film. 7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)10.4 inches (TFT), replace the backlight (2 / set)LT4000M (module type DIO), PNP output, DC24V (host) Proface Screen protection film. The main controller is connected to the man-machine interrface of the host, for MPI communicationB/B+/C FLEX NETWORK Type connector (5)5 CA3-DFS6-01. 7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).Fitting on NETWORK FLEX interface. Connecting NETTWORK FLEX communication cable Proface CA3-DFS6-01. (5 / set)Expansion module for the GP3000 access to the CANopen network and communication with the CANopen master station