Proface CA3-DFS6-01 Manual CA3-DFS6-01 User's Manual

USB cable to prevent disconnection of the fastening clip (5 / set)The main controller is connected to the man-machine interface for MPI communicationCOM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionFor 3.8 inch models, connect the connector to the DIO interface CA3-DFS6-01 User's Manual. For connecting external I/O devices. (5 / set)Adapter for EX module (5 / set)Touch panel operation for RGB input modules (Master - from: Mini-B)12 CA3-DFS6-011 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Expansion module for the GP3000 access to the CC-Link network and communication with the CC-Link master station (support for intelligent devices)COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)10 CA3-DFS6-01 User's Manual. 4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.USB cable clamp for preventing disconnection of connection (5 / set)Use external output for the GP3000 series of auxiliary connectors (5 / sets) CA3-DFS6-01 User's Manual. Used in a variety of host and man-machine interface for RS-422 connectionCOM2 terminal adapter for communication through the RS-422/485 connection5.7 inches, GP installed to the hard panel to provide dust and moisture proof function.10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).15 inches, replaced by a host of backlight (1).256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Suitable for GLC2300 series7.5 inches, GP installed to the hhard panel to provide dust and moisture proof function CA3-DFS6-01 Manual. Suitable for A/B+ Type modelsA connector that connects the DIO interface for connecting an external I/O device (5 sets).10.4 inches (TFT), the replacement of the host backlighht (1) CA3-DFS6-01 Manual. 1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.