H8PS-16BP OMRON H8PS-16BP

Type: 1C contact type.
Shape: square.
Terminal shape: terminal for printed board.
Action: alternate.
Display mode: do not display.
Operation Department color: red.
Large capacity compact type push button switch.
Can also be used as a power switch with a large capacity cut.
Can be switched from micro load (minimum applicable load 1mA DC5V) to large capacity load OMRON H8PS-16BP. Specifications: I/O; NPN (input: + common,
output: - common); Input:
8 points/Output: 8 points H8PS-16BP
I/O connections: M3 screw terminals.
Rated internal circuit power supply voltage:
Supplied from Basic Unit.
I/O power supply voltage: 24 VDC.
A Smart Slave with a 3-tier Terminal,
Block That Means Wiring Locations,
Are Easy to Understand with No,
Sharing of Terminals OMRON H8PS-16BP.
Easy wiring with no sharing of terminals.
Easy-to-understand wiring locations.
No relay terminal block terminals required.
Detachable cassette-type circuit sections.Ratings: 1 A at 30 VDC.
LED indicator: With indicator.
Actuator: Roller plunger.
Many Models Including Roller Lever OMRON H8PS-16BP.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting .
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating).
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Appearance: Shielded, M12.
Sensing distance: 3 mm.
Output configuration: DC 2-wire (polarity).
Operation mode: NC.
Proximity Sensor Ideal for the Food and Beverage Industry. Power supply voltage: 12 to 24 VDC.
Output configuration: Open-collector output.
Resolution (divisions): 256 (8-bit).
Connector for H8PS Cam Positioner: Supported.
General-purpose Absolute Encoder.
with External Diameter of 50 mm.
Absolute model.
External diameter of 50 mm.
Resolution: 256 (8-bit).
Lightweight construction using plastic body. Appearance: Sensor head: Anchored type.
Temperature: MMeasurement raange, 0 to 60°C;
Measurement precision, ±0 H8PS-16BP.3°C (at 25°C); Resolution, 0.1°C.
Relative humidity: Measurement range, 20 to 85%;
Measurement precision, ±2.5% (at 25°C, 10 to 85%); Resolution, 0.1%.
Weight (packaged): Approx. 300 g.
AAcccessories: Mounting screw (M3 x 8) x 1 Caps to secure cable,
(one for each, front and rear) H8PS-16BP.
Easy temperature and humidity control with an SD Card.
H8PS-16BP Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=H8PS-16BP&select=5