MITSUBISHI A1S64TCTRTBW A1S64TCTRTBW

Power supply: 110mA DC5V (PLC internal power supply), 80mA DC24V (through the power connector by the external power supply).
Analog input points: 4 points.
Voltage input: DC-10~10V.
Current input: DC-20~20mA, 4~20mA.
Weight: 0.2kg.
Dimensions: 55 x 90 x 87.
Voltage input and current input of 4 channels can be carried out,
Each channel can be specified as a current input or voltage input MITSUBISHI A1S64TCTRTBW.
Built in digital filter function and peak hold function, etc A1S64TCTRTBW,
Achieved a high speed of 500 AD S/ch conversion.
FX3UC-4AD can be connected to the FX3GC or FX3UC series. Power: 7.5kw.
Purpose: to suppress the power harmonics.
Connected to the inverter input, can be used to improve the power factor, reduce the input side of the high harmonic current MITSUBISHI A1S64TCTRTBW.
According to the motor power used to select AC reactor.
(when the inverter capacity is greater than the motor capacity, is still based on the motor capacity to choose.) Input points: 24 points.
Output points: 16 points.
Power supply voltage: AC160-240V.
Output type: relay output MITSUBISHI A1S64TCTRTBW.
Built in CPU, power supply, input and output. While maintaining the convenience of FX1N while improving performance .
Special adaptor and function expansion board can be installed and used FX3 series.
High speed operation.
Basic instructions: 0.21 s/ instruction.
Application instruction: 0.5 s/ instruction.
Large capacity memory.
Built in program memory 32000 steps.
EEPROM memory cartridge with program transfer function. Cable length: 0.5mCable 3M for the expansion of the floor, the expansion of a floor for every 1 units.Max input / output points: 64 points.
Supply voltage: 100 - 240VAC.
Input points: 32 points.
Output points: 32 points.
Output type: transistor.
Power consumption: 60VA.
Weight (kg):1.0.
Size (WxHxD) mm:220x90x87.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Paassword protectioon, using a eight digit password to protect your program A1S64TCTRTBW.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application off tthe continuous scan time A1S64TCTRTBW.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017).
A1S64TCTRTBW Operation manual/Instructions/Model selection sample download link: /searchDownload.html?Search=A1S64TCTRTBW&select=5