LK Automation Limited
Home >> Products >> OMRON >> Sensor >> Fiber sensor >> fiber amplifier >> E3X-DA51R-S 2M OMRON Digital Fiber Amplifier Unit E3X-DA51R-S 2M

E3X-DA51R-S 2M OMRON Digital Fiber Amplifier Unit E3X-DA51R-S 2M

Brand: OMRON
Name: Digital Fiber Amplifier Unit
Model: E3X-DA51R-S 2M
Type: Ultra-long-term APC models.
Connecting method: Pre-wired (2 m).
Model: PNP output.
Applicable wire-saving connector(sold separately): Type,--; Model,--.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.

Appearance: Shielded, 3 dia.
Sensing distance: 0.5 mm.
Model: Output configuration, NPN open-collector output; NO.
Subminiature Sensors with.
Long-distance Detection.
Shielded Sensor Heads from 3-mm to M12 diameters that,
can be embedded in metal.
Robotics cables provided as a standard feature (DC 2-Wire Models) OMRON E3X-DA51R-S 2M.
Indicator provided in Amplifier cable for easy confirmation of operation E3X-DA51R-S 2M
Power supply range of 5 to 24 VDC for DC 3-Wire Models. Using a pushbutton enables,
accurately detecting difficult-to-detec objects.
Conforms to standards for semiconductor FOUP cassettes to ena,
accurately detecting FOUP cassettes without being affected by the,
material, color, or reflectance of the bottoms of the cassettes OMRON E3X-DA51R-S 2M.
Thin design enables mounting in a wider range of applications, e.g.,
on transfer arms.
Increased visibility with 4-direction indicator.
Optical detection of actuator operation provides a long life,
(mechanical life: 5 million operations min.).
Models available with PNP or NPN output.
Models are available with very flexible robot cable. Sensing method: Convergent-reflective OMRON E3X-DA51R-S 2M.
Connection method: Pre-wired (2 m).
Sensing distance: 5 to 15 mm.
Operation mode: Light-ON.
Model: NPN output.
Makes Mounting and Installation Simpler and Smoother.
Suitable for Applications in the Rechargeable Battery Industry. Appearance: M4 OMRON Digital Fiber Amplifier Unit.
Sensing distance: 2 mm.
Connecting method: M8 Pre-wired Connector Models (0.3 m).
Cable specifications: PVC (oil-resistant) OMRON Digital Fiber Amplifier Unit.
Operation mode: NC.
Wire color /pin arrangement: 1: +V, 3: 0 V, 4: Control output.
Model: PNP output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available OMRON Digital Fiber Amplifier Unit.
High-speed response ffrequency stably detects moving,
objects: 5 kHz max E3X-DA51R-S 2M.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube againstt wire,
breakage is available (M4, M5 only) OMRON E3X-DA51R-S 2M.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables.


...More relevant models >>>>