Home
>> Products
>> OMRON
>> Sensor
>> Fiber sensor
>> fiber amplifier
>> E3X-DA9R-S OMRON Digital Fiber Amplifier Unit OMRON E3X-DA9R-S
E3X-DA9R-S OMRON Digital Fiber Amplifier Unit OMRON E3X-DA9R-S
Brand:
OMRON
Name: Digital Fiber Amplifier Unit
Model: E3X-DA9R-S
Type: Ultra-long-term APC models.
Connecting method: Wire-saving connector *1.
Model: PNP output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.
...More relevant models >>>>
Name: Digital Fiber Amplifier Unit
Model: E3X-DA9R-S
Type: Ultra-long-term APC models.
Connecting method: Wire-saving connector *1.
Model: PNP output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors.
Select from four easy-to-use shapes for efficient space,
utilization.
Connectors with locks for safety against vibration.
Convenient mounting method using M3 screws OMRON E3X-DA9R-S.
Wide operating voltage range: 5 to 24 VDC. Appearance: M8.
Sensing distance: 4 mm E3X-DA9R-S
Connection method: Pre-wired Models (2 m).
Cable specifications: PVC (oil-resistant).
Polarity: Yes.
Operation mode : NC.
Pin arrangement: --.
Applicable connector code: --.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals OMRON E3X-DA9R-S.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection.
Cable protector provided as a standard feature OMRON E3X-DA9R-S. E32-D73-S type: environment resistant; heat resistant,
Specialty: heat resistant: 400,
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsAppearance: Shielded, 5.4 dia OMRON Digital Fiber Amplifier Unit.
Stable sensing distance: 1.5mm.
Proximity Sensor with Separate.
Amplifier Unit for Detection of.
Non-ferrous Metals with Simple OMRON Digital Fiber Amplifier Unit.
Sensitivity Adjustment.
Detects aluminum, copper, and other non-ferrous metals.
Product lineup includes compact, flat Sensor Head (E2CY-V3A) and,
model with fluororesin (E2CY-C2AF) for resistance to chemicals.
Simple teaching function to easily adjust sensitivity.
Check detection status at a glance with numeric values on a digital display OMRON Digital Fiber Amplifier Unit. Power supply voltage: AC/DC power supply selectable type.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 40 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-refleective: 2 E3X-DA9R-S. 5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectaable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON E3X-DA9R-S.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
modulation for reduced external,
light interference and a,
connector for easy maintenance.
Built-in connectors.
Select from four easy-to-use shapes for efficient space,
utilization.
Connectors with locks for safety against vibration.
Convenient mounting method using M3 screws OMRON E3X-DA9R-S.
Wide operating voltage range: 5 to 24 VDC. Appearance: M8.
Sensing distance: 4 mm E3X-DA9R-S
Connection method: Pre-wired Models (2 m).
Cable specifications: PVC (oil-resistant).
Polarity: Yes.
Operation mode : NC.
Pin arrangement: --.
Applicable connector code: --.
Your Search for Proximity Sensors.
Starts with the World-leading.
Performance and Quality of the E2E.
Standard Sensors for detecting ferrous metals OMRON E3X-DA9R-S.
Wide array of variations. Ideal for a variety of applications.
Models with different frequencies are also available to prevent,
mutual interference.
Superior environment resistance with standard cable made of oil,
resistant PVC and sensing surface made of material that resists,
cutting oil.
Useful to help prevent disconnection.
Cable protector provided as a standard feature OMRON E3X-DA9R-S. E32-D73-S type: environment resistant; heat resistant,
Specialty: heat resistant: 400,
Bending radius (mm): R25.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsAppearance: Shielded, 5.4 dia OMRON Digital Fiber Amplifier Unit.
Stable sensing distance: 1.5mm.
Proximity Sensor with Separate.
Amplifier Unit for Detection of.
Non-ferrous Metals with Simple OMRON Digital Fiber Amplifier Unit.
Sensitivity Adjustment.
Detects aluminum, copper, and other non-ferrous metals.
Product lineup includes compact, flat Sensor Head (E2CY-V3A) and,
model with fluororesin (E2CY-C2AF) for resistance to chemicals.
Simple teaching function to easily adjust sensitivity.
Check detection status at a glance with numeric values on a digital display OMRON Digital Fiber Amplifier Unit. Power supply voltage: AC/DC power supply selectable type.
Sensing method: Through-beam (Emitter + Receiver).
Sensing distance: 40 m.
Output configu ration: Relay.
Long-distance Photoelectric Sensor.
That Supports AC/DC Power Supplies.
Long sensing distance that is approximately 8,
times that of our conventional model (for the,
Through-beam and Diffuse-reflective models).
(Through-beam: 40 m, Retro-reflective: 7 m, and,
Diffuse-refleective: 2 E3X-DA9R-S. 5 m.) .
Improved visibility:
A red LED that makes the spot visible.
Large indicators that can be seen even from a,
distance.
Improved operability.
(Enlarged sensitivity adjuster and operation selector)
Freely selectaable power supply input (24 to 240 VDC, 24 to 240 VAC) OMRON E3X-DA9R-S.
(Additional types added to the DC type lineup.)
Models with infrared LEDs are also available.
...More relevant models >>>>
Last one: OMRON Digital Fiber Amplifier Unit E3X-DA51R-S 2M
next one: OMRON Digital Fiber Amplifier Unit E3X-DA51F-S 2M
Related download