LK Automation Limited
Home >> Products >> OMRON >> Sensor >> Fiber sensor >> fiber amplifier >> E3X-DA7F-S OMRON E3X-DA7F-S Digital Fiber Amplifier Unit

E3X-DA7F-S OMRON E3X-DA7F-S Digital Fiber Amplifier Unit

Brand: OMRON
Name: Digital Fiber Amplifier Unit
Model: E3X-DA7F-S
Type: High-speed response models.
Connecting method: Wire-saving connector *1.
Model: NPN output.
Applicable wire-saving connector(sold separately):
Type,Master connector, Slave connector; Model, E3X-CN21, E3X-CN22.
Stable Detection with Advanced Fiber.
Amplifier Units.
A wide range of added value with standard models with one,
input and two outputs, and ultra-long-term APC models with an,
APC life of approximately 20 years.
Power turning to easily set the optimum light level.
Automatic Power Control (APC) is always enabled to stabilize,
emitter power with high accuracy.
GIGA RAY for stable detection with the highest level of power in,
this class even for low-reflective objects and large objects.
The E3X-DA0-S supports an EtherCAT Sensor Communications,
Unit or CompoNet Sensor Communications Unit.

Power supply voltage: 12 to 24 VDC.
Output configuration: Open-collector output.
Detects the Rotary Encoder Direction.
Input phase difference signal from the Encoder to detect the,
direction of rotation.
High-speed response at 120 kHz.
Mounts to DIN Track. Thin design enables superb mounting efficiency OMRON E3X-DA7F-S.
Front-panel switch enables reversing phase Z logic.
Enables connecting either voltage outputs or open-collector outputs E3X-DA7F-S Free change detection direction.
Small, can press the front, side (15 degrees) position change detection direction. Sensing method: Through-beam type (with slot).
Sensing distance: 3.6 mm (slot width).
Output type: NPN output.
Output configuration: Light-ON.
Photomicrosensor with light,
modulation for reduced external,
light interference and a,
connector for easy maintenance OMRON E3X-DA7F-S.
Built-in connectors.
Select from four easy-to-use shapes for efficient space,
utilization.
Connectors with locks for safety against vibration.
Convenient mounting method using M3 screws.
Wide operating voltage range: 5 to 24 VDC. E3JK-R62 regression reflection type,
E3JK direct current mode: mode; shading ON,
Miniature amplifier built-in type photoelectric switchSensing method: Diffuse-reflective Sensors OMRON E3X-DA7F-S.
Appearance: Vertical.
Connection method: Pre-wired.
Sensing distance: 200 mm.
Functions: --.
Model: NPN output.
Ordering Information OMRON Digital Fiber Amplifier Unit.
Built-in Amplifier Photoelectric Sensors. Appearance: 3 dia.
Sensing distance: 2 mm.
Connecting method: Pre-wired Models (2 m) OMRON Digital Fiber Amplifier Unit.
Cable specifications: PVC (oil-resistant).
Operation mode: NO.
Wire color /pin arrangement: Brown: +V, Black: Output, Blue: 0 V.
Model: NPN output.
Ultra small size, but surprisingly easy installation!
With the addition of M4, 5.4-dia., 6.5-dia. size, unshielded,
pre-wired connector model, and connector model, a total of,
108 model variations are available OMRON Digital Fiber Amplifier Unit.
High-speed responnse frequency stably detects moving,
objects: 5 kHz max E3X-DA7F-S.
Four indicator lamps for easier indicator positioning.
Special mounting brackets reduce time and efforts for,
installation.
Protective Stainless-steel Spiral Tube againstt wire,
breakage is available (M4, M5 only) OMRON E3X-DA7F-S.
Models also available with standard cables that are 5 m long,
or with robot (bending-resistant) cables.


...More relevant models >>>>