PFXZGPFSR6W1 57 inch veneer Proface PFXZGPFSR6W1 

Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationTouch screen anti ultraviolet protective film (1 pieces).The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail Proface PFXZGPFSR6W1. SD memory card (4GB, MLC, CLASS4).Interface module for the simultaneous use of A/QnA/FX series external controllerUSB interface products: without the base of the tower lights, 3 sections, can be changed color and flashing display, the configuration of the buzzer PFXZGPFSR6W1Connector for connecting DC power cord. (right angle, 5 / set)For the elastic display module installation nut wrench (1 / set) Proface PFXZGPFSR6W1. The PC adapter for PCMCIA slot read CF card required.Touch screen anti ultraviolet protective film (1 pieces).Suitable for LT4000M/GP4000M series modules, 5.7 inch. Used to install the human machine interface to the fixed panel (2 / cover).Suitable for A/B+ Type modelsGLC2300 is not availableThe man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port Proface PFXZGPFSR6W1. 5 / setsFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters.Use external output for the GP3000 series of auxiliary connectors (5 / sets) Proface 5.7 inch veneer. The man-machine interface directly connected MITSUBISHI electric PLC FX series CPU programming port.The three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface Proface 5.7 inch veneer. The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.GP2500S usePortable GP2000H series models accessories, RS-232 single head cable (10 m).For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set) Proface 5.7 inch veneer. COM2 terminal adapter for communication through the RS-422/485 connectionThe main controller is connected to the man-machine interface of the host, for MPI communicationOMRON SYSMAC series PLC or other main controller) connected to GP, length: 5 m PFXZGPFSR6W1. 5 / setsCable for connecting GP3000 to various modules2 / setsStop pin, prevent cable connecction loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces) Proface PFXZGPFSR6W1.