Proface CA5-DCCNM-01 DC power adapter Proface CA5-DCCNM-01

Connector for connecting DC power cord. (right angle, 5 / set)Touch screen anti ultraviolet protective film (1 pieces).One end is a loose wire, which is used to carry out RS-232C connection between the host and LT.Suitable for LT4000M/GP4000M series modules, 3.5 inch.The MITSUBISHI Q series PLC is connected to GP, length: 5 m Proface CA5-DCCNM-01. 5 / setsDisposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceThe main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail CA5-DCCNM-01The main controller is connected to the man-machine interface for MPI communication7.4 inches, installed to provide the function of dust and moisture1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface CA5-DCCNM-01. Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Touch screen anti ultraviolet protective film (1 pieces).For 5.7 inch models, connect the connector to the DIO interface Proface CA5-DCCNM-01. For connecting external I/O devices. (5 / set)A connector that connects the DIO interface for connecting an external I/O device (5 sets).COM2 adapter for converting the COM2 interface to the RS-422 terminal blockClock battery, save system date and time when power is off Proface DC power adapter. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters Proface DC power adapter. Used for surface protection of man-machine interface from oil and chemical pollution (5 / set).12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.LT4000M (module type DIO), PNP output, DC24V (host).7 Proface DC power adapter. 4 inches or larger, for external reset input, NNETWORK FLEX communication, audio output CA5-DCCNM-01. AUX connector, L typeThe main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.Connect to PC, transfer screeen data and user programs Proface CA5-DCCNM-01. Engineering documents created by the LT interface to download images and logic programming software through the USB interface.