CA6-DIOCNALL-01 Proface DIO connector Proface CA6-DIOCNALL-01

Touch screen anti ultraviolet protective film (1 pieces).Used to convert RGB to DVI-A5.7 inch screen protective cover (1 pieces)Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).7.5 inches, GP installed to the hard panel to provide dust and moisture proof function.The man-machine interface directly connected MITSUBISHI electric PLC Q series CPU programming port Proface CA6-DIOCNALL-01 CA6-DIOCNALL-01 10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)10.4 inches and above, used to connect the power cord (5 / set) Proface CA6-DIOCNALL-01. 10.4 inches (TFT), the replacement of the host backlight (1).For connecting GP operation data with D-Sub RS-232C and power /DIO terminals.5.7 inches, installed to provide the function of dust and moistureOne end is a loose wire, which is used to carry out RS-232C connection between the host and LT.12 way 4 digital signals into analog signals and output resultsThe main controller is connected to the man-machine interface for MPI communicationScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceInput / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point NPN transistor outputThe three color tower lamp installed on the fixed panel is connected with the human machine interface through the USB interface Proface CA6-DIOCNALL-01 Proface DIO connector Proface DIO connector. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)The main controller is connected to the man-machine interface of the host, for MPI communicationThe MITSUBISHI A series PLC is connected to GP, length: 5 m.SD memory card (4GB, MLC, CLASS4) Proface DIO connector. 10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)Connector for connecting DC power cord (5 / set) CA6-DIOCNALL-01. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.LT4000M (module type DIO), PNP output, DC24V (host).The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail Proface CA6-DIOCNALL-01.