Proface CA8-CANLT-01 CANopen master module Proface CA8-CANLT-01

Used to display analog RGB (2 channels) on the GP3000A veneer, for the GP4000 series back loading models of full flush (white, 1)Replaceable anti fouling film for protecting screen protective film (5 sheets / cover).Connect to PC, transfer screen data and user programs.12.1 inch /10.4 inch (STN), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set) Proface CA8-CANLT-01 CA8-CANLT-01 A veneer, for the GP4000 series back loading models of full flush (white, 1)1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Memory for extending EX GP-Pro alarm and character table functions Proface CA8-CANLT-01. Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).The MITSUBISHI A series PLC is connected to GP, length: 5 m.5.7 inches, replace the backlight (1 / set)Support CANopen from the station module, with a 12 point digital input, 6 point relay output and 2 point transistor PNP output Proface CA8-CANLT-01. Up to 7 EX modules can be connected.The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening Proface CANopen master module. For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices Proface CANopen master module. (5 / set)Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceFitting on NETWORK FLEX interface. Connecting NETWORK FLEX communication cable. (5 / set)Disposable battery (1 blocks) for backing up clock data.For the elastic display module installation nut wrench (1 / set) Proface CANopen master modulle CA8-CANLT-01. Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.10.4 inches (TFT), the replacement of the host backlight (1).10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)COM2 interface with the cable (RS-422), used to connect the 2-Port adapter to the man-machine interface