CA6-FNCNALL-01 Proface CA6-FNCNALL-01 FLEX NETWORK joint

Connect to USB printer (Type-B).12.1 inches, replaced by a host of backlight (1).When the man-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces).GP2500S useB/B+/C FLEX NETWORK Type connector (5)For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set) Proface CA6-FNCNALL-01. 10.4 inches (TFT), the replacement of the host backlight (1) CA6-FNCNALL-01Used to prevent disconnection of the connection (1 interface, 5 / set).The MITSUBISHI A series PLC is connected to GP, length: 5 m.Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)Protection for GP rear connectors (large and small for each of the 1) Proface CA6-FNCNALL-01. Provide dust proof and moisture proof function when installing GP3000H conversion adapter to hard panel.Used to install the human machine interface to the fixed panel (2 / cover).12.1 inch screen protective cover (1 pieces)7.4 inches, replace the backlight (1 / set)Connector for connecting DC power cord (5 / set).Converting 4 analog signals into digital signalsStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface CA6-FNCNALL-01.
Length of 5 meters. Apply to GLC-2600/2500SD memory card (4GB, MLC, CLASS4).CFast cards (32GB, SLC,) inserted in the CFast slot for storage Proface FLEX NETWORK joint. For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Touch screen anti ultraviolet protective film (1 pieces) Proface FLEX NETWORK joint. 5.7 inches thin film used for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).Used to connect the GP2000H series RS-422 conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters Proface FLEX NETWORK joint. Connector for connecting DC power cord (5)Adapter for EX module (5 / set)With the installation of screws (4 / sets), ffor the GP4000 series back mounted to the fixed panel models CA6-FNCNALL-01. (2 / set)COM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine iinterface Proface CA6-FNCNALL-01. 3.5 inch screen protective cover (1 pieces)Screen protection cover (1 pieces) for protecting screen against pollution of man-machine interface