Grid
List
MITSUBISHI
Network module
A1SJ71QLR21
3C-2V/5C-2V coaxial cable between double loop PC (control station / common station) / remote I/O network (remote master station). Q mode.
Network module
A1SJ71QLR21
3C-2V/5C-2V coaxial cable between double loop PC (control station / common station) / remote I/O network (remote master station). Q mode.
MITSUBISHI
Network module
A1SJ72QLR25
3C-2V/5C-2V coaxial dual ring remote I/O network (remote I/O station). Q mode.
Network module
A1SJ72QLR25
3C-2V/5C-2V coaxial dual ring remote I/O network (remote I/O station). Q mode.
MITSUBISHI
Network module
A1SJ71BR11
3C-2V/5C-2V coaxial cable between the single bus PC network (control station / common station) / remote I/O network (remote master). The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on.
Network module
A1SJ71BR11
3C-2V/5C-2V coaxial cable between the single bus PC network (control station / common station) / remote I/O network (remote master). The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on.
MITSUBISHI
Network module
A1SJ71LR21
3C-2V/5C-2V coaxial cable between double loop PC (control station / common station) / remote I/O network (remote master station). The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on.
Network module
A1SJ71LR21
3C-2V/5C-2V coaxial cable between double loop PC (control station / common station) / remote I/O network (remote master station). The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on.
MITSUBISHI
Network module
A1SJ72QBR15
3C-2V/5C-2V coaxial cable single bus remote I/O network (remote I/O station). Q mode.
Network module
A1SJ72QBR15
3C-2V/5C-2V coaxial cable single bus remote I/O network (remote I/O station). Q mode.
MITSUBISHI
Network module
A1SJ71QBR11
3C-2V/5C-2V coaxial cable between the single bus PC network (control station / common station) / remote I/O network (remote master). Q mode.
Network module
A1SJ71QBR11
3C-2V/5C-2V coaxial cable between the single bus PC network (control station / common station) / remote I/O network (remote master). Q mode.
MITSUBISHI
Melsecnet module
A1SJ71LP21
10Mbps transmission speed, the computer as the support of the flexible manufacturing system at the plant level, the requirements of more and more data flow, High transmission speed can be guaranteed to increase the amount of transmitted data while maintaining the minimum time to transfer and receive data between programmable controllers. The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on.
Melsecnet module
A1SJ71LP21
10Mbps transmission speed, the computer as the support of the flexible manufacturing system at the plant level, the requirements of more and more data flow, High transmission speed can be guaranteed to increase the amount of transmitted data while maintaining the minimum time to transfer and receive data between programmable controllers. The response time of PLC is the interval between the time of the change of the external output signal of the PLC and the time of the change of the external output signal which is controlled by it, Lag time, this is the time constant of the input circuit, The time constant of the output circuit, the arrangement of the user statement and the use of the instruction, The cycle scan mode of PLC and the way of PLC to refresh the I/O and so on.
MITSUBISHI
Melsecnet module
A1SJ71LP21GE
Using A1SJ71LP21 and A1SJ71BR11MELSECNET/10 modules, Can be any ANSCPU module to the network system. Two options can be provided; the optical cable token ring network and the coaxial cable token bus network.
Melsecnet module
A1SJ71LP21GE
Using A1SJ71LP21 and A1SJ71BR11MELSECNET/10 modules, Can be any ANSCPU module to the network system. Two options can be provided; the optical cable token ring network and the coaxial cable token bus network.
MITSUBISHI
Network module
A1SJ72QLP25
SI/QSI/H-PCF/ wide H-PCF optical cable dual layer remote I/O network (remote I/O station) Switch volume control is designed to, According to the current input combination of the switch quantity and the history of the input sequence, So that PLC generates the corresponding switching output, In order to make the system work in a certain order. So, sometimes also known as the order control.
Network module
A1SJ72QLP25
SI/QSI/H-PCF/ wide H-PCF optical cable dual layer remote I/O network (remote I/O station) Switch volume control is designed to, According to the current input combination of the switch quantity and the history of the input sequence, So that PLC generates the corresponding switching output, In order to make the system work in a certain order. So, sometimes also known as the order control.
2 Results Page: 1 2 next page >>