FN-X32TS41 Proface FN-X32TS41 32 point NPN/PNP input

LT fasteners installed on the control panel (4 / set)A connector that connects the DIO interface for connecting an external I/O device (5 sets).15 inches, GP installed to the hard panel to provide dust and moisture proof function.12 way 4 digital signals into analog signals and output resultsUsed to connect the 2-Port adapter to GP4000Some types of PLC are not connected Proface FN-X32TS41. Length: 5 meters FN-X32TS4112.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.7.4 inches, replace the backlight (1 / set)Disposable battery (1 blocks) for backing up clock data.15 inches, replaced by a host of backlight (1).Used to prevent disconnection. (1 interface, 5 / set)For RGB input USB cable to prevent disconnection (2 / set)Portable GP2000H series models accessories, RS-422 single head cable (3 m) Proface FN-X32TS41. USB cable clamp for preventing disconnection of connection (5 / set)The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication.256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card Proface FN-X32TS41. Interface module for the simultaneous use of A/QnA/FX series external controllerLT4000M (module type analog), NPN output, DC24V (host).Touch screen anti ultraviolet protective film (1 pieces) Proface 32 point NPN/PNP input. GLC2300 is not availableFor the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 1 meters Proface 32 point NPN/PNP input. Used to convert the USB interface to the serial interface (RS-232C). A modem or bar code reader that can be connected to support RS-232C.A veneer, for the GP4000 series back loading models of full flush (white, 1)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine Proface 32 point NPN/PNP input. B/B+/C FLEX NETWORK Type connector (5)Disposable film (5 sheets / sets) for protecting sscreen against contamination of human computer interfaceThe guide rail mounting adapter is suitable for the host module (PFXLM4B01DAC, PFXLM4B01DAK, PFXLM4B01DDC, PFXLM4B01DDK) without operating the display FN-X32TS41. LT4000M (module type analog), PNP output, DC24V (host) Proface FN-X32TS41. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)