FN-XY16SK41 Proface FN-XY16SK41 16 point NPN/PNP input and 16 point NPN transistor output

A veneer, for the GP4000 series back loading models of full flush (white, 1)COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)GP4000 series back mounted model of waterproof rubber gasket. (1)Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface Proface FN-XY16SK41. Connector for connecting DC power cord (5)GP3000H replacement label (5 sheets / set)The main controller is connected to the man-machine interface for MPI communicationDurable interface cable for connecting GP with external devices (such as the main controller), equipped with a universal filter FN-XY16SK413 / setsUsed to prevent disconnection of the connection (1 interface, 5 / set) Proface FN-XY16SK41. The host controller is connected to the host computer interface, which is used for multiple connection (n:1) communication.For the man-machine interface hanging in the neck lanyard.The MITSUBISHI Q series PLC is connected to GP, length: 5 m.Cable for connecting GP3000 to various modulesFor 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of the opening Proface FN-XY16SK41. 5.7 inches, installed to provide the function of dust and moistureTransmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module.3.5 inch screen protective cover (1 pieces)I/O module, including 32 point NPN/PNP inputTouch panel operation for RGB input modules (Master - from: Mini-B)Memory for extending EX GP-Pro alarm and character table functions Proface 16 point NPN/PNP input and 16 point NPN transistor output Proface 16 point NPN/PNP input and 16 point NPN transistor output. For connecting GP operation data with RS-422 and power /DIO terminals.Expansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationUsed to output the image signal from the host computer to GPSlave station module for connecting support for CANopenWhen the mann-machine interface is installed to the fixed panel for providing dust proof and moisture proof function (1 pieces) Proface 16 point NPN/PNP input and 16 point NPN transistor output FN-XY16SK41. Extension cable for connecting USB (Mini-B) innterface to front panel Proface FN-XY16SK41. For the direct connection of the MITSUBISHI A series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.