FN-CABLE2010-31-MS Proface FN-CABLE2010-31-MS Communication cable (10 m)

256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.A veneer, for the GP4000 series back loading models of full flush (white, 1)The PC adapter for PCMCIA slot read CF card required.The main body module and the separate display module are used for connecting the main machine module and the separate display module in the DIN guide rail Proface FN-CABLE2010-31-MS FN-CABLE2010-31-MS 12.1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)10.4 inches or more, for the film surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set)LT4000M (module type DIO), PNP output, DC24V (host) Proface FN-CABLE2010-31-MS. Stop pin, prevent cable connection loose USB cable fastening clip (Type-A*1 USB, Mini-B, each 1 interface), used to adjust the thickness of the mounting panel 2mm gasket (1 pieces).For connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface FN-CABLE2010-31-MS. Portable GP2000H series models accessories, RS-422 cable with D-Sub connector (10 meters).Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (3 meters) Proface Communication cable (10 m). The installation of accessories, adjust the size of the GP-411xT panel with the same size of the GP-410xG/W, easy to replace Proface Communication cable (10 m). LT4000M (module type analog), PNP output, DC24V (host).Adapter for converting an audio output portion of a AUX adapter into a Jack Pin socket.10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10 Proface Communication cable (10 m). 4 inch GP2500 (TFT) in the installation of the required accessories.5 / settsAdapter for EX module (5 / set)Mounting screws (4 sets) to be fitted to the hard panel at the interface of the machine FN-CABLE2010-31-MS. For 5.7 inch models, for the 5.7 inch man-machine interface into the LT series (A/B/B+/C/H Type) of tthe opening Proface FN-CABLE2010-31-MS. Use external output for the GP3000 series of auxiliary connectors (5 / sets).Length: 5 meters.Cable for connecting GP3000 to various modules