FN-AD04AH11 Proface FN-AD04AH11

A veneer, for the GP4000 series back loading models of full flush (white, 1)For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters.Extension cable for connecting USB (Mini-B) interface to front panel.B/B+/C FLEX NETWORK Type connector (5)The main controller is directly connected to the man-machine interface (D-sub 9 pin concave) for multiple connection (n:1) communication Proface FN-AD04AH11 FN-AD04AH11 Used to prevent accidental operation. Includes 3 mounting screws.Applicable to GLC-2600/2500, the need for bus converter (PSL-CONV00).Extension cable for connecting USB (Type-A) interface to front panel.Memory for extending EX GP-Pro alarm and character table functions Proface FN-AD04AH11. GP4000 series back mounted model of waterproof rubber gasket. (1)12.1 inches, replace the backlight (1 / set)Length: 5 meters.LT seal on the control panel.Used to connect the GP2000H series RS-232C conversion adapter with GP3000H, with D-Sub connectors.
Length: 3 meters. COM1 interface with the cable for direct connection to the CPU series PLC QGP2500S useCOM1 pin adapter, which is used to connect the communication components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface Proface FN-AD04AH11. For 3.8 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Standard cable for connecting GP3000H adapter and GP3000H Proface 4 channel A/D conversion module.
Length: 3 meters. The main controller is connected to the man-machine interface for MPI communicationUsed for surface protection of man-machine interface from oil and chemical pollution (5 / set) Proface 4 channel A/D conversion module. 7.4 inches or larger, for external reset input, NETWORK FLEX communication, audio output. AUX connector, L typeFor connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block Proface 4 channel A/D conversiion module FN-AD04AH11. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.With a fixed screw of the pre USB protection cover, in compliance with IP66F, IP67F, 1/4X Type only indoor use /113 or ATEX certification (5 / set) Proface FN-AD04AH11. When the man-machine interface is installed to the fixed panel to provide dust proof and moisture proof function. (1)