FN-CABLE2200-31-MS Proface FN-CABLE2200-31-MS

Cable for connecting GP3000 to various modulesFor connecting the GP3000H cable connector and the external output port, the output of the following connectors: serial: D-Sub 9 pin (convex), Ethernet: Jack RJ-45 (Modular), other: terminal block.Extension cable for connecting USB (Type-A) interface to front panel Proface FN-CABLE2200-31-MS. COM1 interface with the cable for direct connection to the CPU series PLC ACOM2 module is applicable for the isolation of COM2 through a variety of hosts and GP3000 connectionUsed in a variety of host and man-machine interface for RS-422 connectionAdapter for EX module (5 / set)5 FN-CABLE2200-31-MS7 inch screen protective cover (1 pieces)Used to convert RGB to DVI-ATouch screen anti ultraviolet protective film (1 pieces) Proface FN-CABLE2200-31-MS. SD memory card (4GB, MLC, CLASS4).Extension cable for connecting USB (Mini-B) interface to front panel.For 5.7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)COM1 interface with the cable (RS-232C), used to connect directly to the CPU series PLC FX (not the same time using the programming controller)10.4 inches (TFT), the replacement of the host backlight (1) Proface FN-CABLE2200-31-MS. The man-machine interface directly connected MITSUBISHI electric PLC QnA series A/ CPU programming port.Connector for connecting a serial port (1)12.1 inches, replaced by a host of backlight (1).Suitable for GLC2300 seriesScreen protection cover (1 pieces) for protecting screen against pollution of man-machine interfaceI/O module, including 32 point NPN/PNP input4 Proface Communication cable (200 m) Proface Communication cable (200 m). 3 Inch Touch Screen anti UV protective film (1 pieces).Apply to GLC-2600/2500Touch screen anti ultraviolet protective film (1 pieces).15 inches, GP installed to the hard panel to provide dust and moisture proof function.Disposable supplies used to protect the screen from the pollution of the man-machine interface film (5 sheets / sets)Portable GP2000H series models accessories, RS-232 cable with D-Sub connector (10 meters) Proface Communication cable (200 m). For the direct connection of the MITSUBISHI FX series CPU PLC (not to be used at the same time, the programmer) length: 5 meters FN-CABLE2200-31-MS. Input / output hybrid I/O modules, including 16 point NPN/PNP input and 16 point PNP transisstor outputStandard interface cable for connecting GP and external devices (such as the main controller), with a universal filter Proface FN-CABLE2200-31-MS.
Length of 10 meters.